assist. prof. dr. Luka Lešnik

Email: luka.lesnik@um.si

PDF Paper
 

KEVORKIJAN, Luka, ŽIC, Elvis, LEŠNIK, Luka, BILUŠ, Ignacijo. Settling of mesoplastics in an open-channel flow. Energies. Nov. 2022, iss. 23, 8786, str. 1-14, ilustr. ISSN 1996-1073. DOI: 10.3390/en15238786.

 

CRUZ-PERAGÓN, Fernando, TORRES JIMÉNEZ, Eloisa, LEŠNIK, Luka, ARMAS, Octavio. Methodology improvements to simulate performance and emissions of engine transient cycles from stationary operating modes: A case study applied to biofuels. Fuel. [Print ed.]. 15 March 2022, vol. 312 (122977), 14 str. ISSN 0016-2361. DOI: 10.1016/j.fuel.2021.122977.

 

KEVORKIJAN, Luka, LEŠNIK, Luka, BILUŠ, Ignacijo. Prediction of cavitation and particle erosion in a radial divergent test section = Napoved kavitacijske erozije in erozije delcev v radialno divergentni testni sekciji. Journal of energy technology. [Tiskana izd.]. sep. 2022, vol. 15, iss. 2, str. 43-64

 

KEVORKIJAN, Luka, LEŠNIK, Luka, BILUŠ, Ignacijo. Cavitation erosion modelling on a radial divergent test section using RANS. Strojniški vestnik. 2022, vol. 68, iss. 2, str. 71-81. ISSN 0039-2480. https://www.sv-jme.eu/sl/article/cavitation-erosion-modelling-on-radial-divergent-test-section-using-rans/, DOI: 10.5545/sv-jme.2021.7364.

 

LEŠNIK, Luka, PALOMAR TORRES, A., TORRES JIMÉNEZ, Eloisa, MATA, C., VOLMAJER VALH, Julija, KEVORKIJAN, Luka, BILUŠ, Ignacijo. The effect of HDPE and LDPE pyrolytic oils on cavitation formation in a common-rail diesel injector. Fuel. [Print ed.]. 15 December 2022, vol. 330 (125581), 14 str. ISSN 0016-2361. DOI: 10.1016/j.fuel.2022.125581.

 

A. Palomar‑Torres, E. Torres‑Jimenez, B. Kegl, G. Bombek, J. Volmajer‑Valh, L. Lešnik. Catalytic pyrolysis of plastic wastes for liquid oils’ production using ZAP USY zeolite as a catalyst. International Journal of Environmental Science and Technology, Feb. 2022. https://doi.org/10.1007/s13762-022-04023-z

Jelen, Ž.; Kandare, D.; Lešnik, L.; Rudolf, R. Optimisation of a Side Inlet for H2 Entry into an Ultrasonic Spray Pyrolysis Device. Processes 20219, 2256. https://doi.org/10.3390/pr9122256

LEŠNIK, Luka, KEGL, Breda, TORRES JIMÉNEZ, Eloisa, CRUZ-PERAGÓN, Fernando, MATA, Carmen, BILUŠ, Ignacijo. Effect of the In-cylinder back pressure on the injection process and fuel flow characteristics in a common-rail diesel injector using GTL fuel. Energies. Jan. 2021, vol. 14, iss. 2, str. [1]-21. ISSN 1996-1073. DOI: 10.3390/en14020452

ŽIC, Elvis, BANKO, Patrik, LEŠNIK, Luka. Hydraulic analysis of gate valve using computational fluid dynamics (CFD). Przegląd Naukowy Inżynieria i Kształtowanie Środowiska. [Online ed.]. 2020, vol. 29, issue 3, str. 275-288. ISSN 2543-7496. http://iks_pn.sggw.pl/PN89/A1/zeszyt89art1en.html, DOI: 10.22630/PNIKS.2020.29.3.23

BILUŠ, Ignacijo, HOČEVAR, Marko, DULAR, Matevž, LEŠNIK, Luka. Numerical prediction of various cavitation erosion mechanisms. Journal of fluids engineering : Transactions of the ASME. April 2020, vol. 142, iss. 4, str. 041402-1-041402-8. ISSN 0098-2202. DOI: 10.1115/1.4045365
Breda Kegl, Luka Lešnik. Influence of water/diesel emulsified fuel on diesel engine characteristics.Thermal Science 2019. doi: 10.2298/TSCI190222319K
TORRES JIMÉNEZ, Eloisa, ARMAS, Octavio, LEŠNIK, Luka, CRUZ-PERAGÓN, Fernando. Methodology to simulate normalized testing cycles for engines and vehicles via design of experiments with low number of runs. Energy conversion and management, ISSN 0196-8904. [Print ed.], Available online 23 August 2018, str. 1-16. https://www.sciencedirect.com/science/article/pii/S0196890418309282?via%3Dihub, doi: 10.1016/j.enconman.2018.08.061.
LEŠNIK, Luka, KEGL, Breda, BOMBEK, Gorazd, HOČEVAR, Marko, BILUŠ, Ignacijo. The influence of in-nozzle cavitation on flow characteristics and spray break-up. Fuel, ISSN 0016-2361. [Print ed.], 15 June 2018, vol. 222, str. 550-560. https://www.sciencedirect.com/science/article/pii/S0016236118303272, doi: 10.1016/j.fuel.2018.02.144. [COBISS.SI-ID 21277462
KEGL, Breda, LEŠNIK, Luka. Modeling of macroscopic mineral diesel and biodiesel spray characteristics. Fuel, ISSN 0016-2361. [Print ed.], 15 June 2018, vol. 222, str. 810-820. https://www.sciencedirect.com/science/article/pii/S0016236118303648, doi: 10.1016/j.fuel.2018.02.169. [COBISS.SI-ID 21277718
LEŠNIK, Luka, MLAKAR, Nejc, BILUŠ, Ignacijo, KEGL, Breda. The optimization of a race car intake system = Optimizacija sesalnega sistema dirkalnika. Journal of energy technology, ISSN 1855-5748. [Tiskana izd.], Oct. 2017, vol. 10, iss. 3, str. 11-23. [COBISS.SI-ID 21056022

LEŠNIK, Luka, BILUŠ, Ignacijo. The effect of rapeseed oil biodiesel fuel on combustion, performance, and the emission formation process within a heavy-duty DI diesel engine. Energy conversion and management, ISSN 0196-8904. [Print ed.], Feb. 2016, vol. 109, str. 140-152, ilustr., doi: 10.1016/j.enconman.2015.12.001. [COBISS.SI-ID 19267350]

VAJDA, Blaž, LEŠNIK, Luka, BOMBEK, Gorazd, BILUŠ, Ignacijo, ŽUNIČ, Zoran, ŠKERGET, Leopold, HOČEVAR, Marko, ŠIROK, Brane, KEGL, Breda. The numerical simulation of biofuels spray. Fuel, ISSN 0016-2361. [Print ed.], 15 Mar. 2015, vol. 144, str. 71-79.  [COBISS.SI-ID18359830

LEŠNIK, Luka, ILJAŽ, Jurij, HRIBERNIK, Aleš, KEGL, Breda. Numerical and experimental study of combustion, performance and emission characteristics of a heavy-duty DI diesel engine running on diesel, biodiesel and their blends. Energy conversion and management, ISSN 0196-8904. [Print ed.], May 2014, vol. 81, str. 534-546. doi: 10.1016/j.enconman.2014.02.039. [COBISS.SI-ID 17694742

LEŠNIK, Luka, VAJDA, Blaž, ŽUNIČ, Zoran, ŠKERGET, Leopold, KEGL, Breda. The influence of biodiesel fuel on injection characteristics, diesel engine performance, and emission formation. Applied energy, ISSN 0306-2619, Nov. 2013, vol. 111, str. 558-570, doi: 10.1016/j.apenergy.2013.05.010. [COBISS.SI-ID 17091350

 

List of papers presented on international conferences.

PDF Paper
LEŠNIK, Luka, KEGL, Breda, BOMBEK, Gorazd, TRATNIK, Nina, PALOMAR TORRES, A., VOLMAJER VALH, Julija. The potential of waste plastic derived oils for usage in compression ignition engine. V: SDEWES 4th SEE Conference Sarajevo 2020 : June 28-July 02, 2020, : Sarajevo, Bosnia and Herzegovina. [S. l.: SDEWES.ORG], 2020. Str. 0277-1-0277-10, ilustr. http://registration.sdewes.org/SEE2020/virtcon/?pr=b350933beaf0ed3edc4046aec58bb415
PERONA-NAVARRO, J. L., PALOMAR TORRES, A., TORRES JIMÉNEZ, Eloisa, ARMAS, Octavio, LEŠNIK, Luka, CRUZ-PERAGÓN, Fernando. Parameters sensitivity analysis in a solenoid common-rail injector model. V: ICREPQ'20 : 18th International Conference on Renewable Energies and Power Quality (ICREPQ'20) : Granada (Spain), 1st to 2nd April 2020. [S. l.: s. n.], 2020. Str. 250-254, ilustr. Renewable energy & power quality journal, vol. no. 18 (June 2020). ISSN 2172-038X. http://www.icrepq.com/icrepq20/286-20-perona.pdf, DOI: 10.24084/repqj18.286

LEŠNIK, Luka, BILUŠ, Mateja. The derivation of empirical sub-model for calculation of combustion model parameters. V: International Conference on Innovative Technologies, 9. - 11. 9. 2015, Dubrovnik. CAR, Zlatan (ur.), KUDLÁČEK, Jan (ur.). IN-TECH 2015 : proceedings, (Proceedings (International Conference on Innovative Technologies), ISSN 1849-0662). Rijeka: Faculty of Engineering, 2015, str. 292-296, ilustr. [COBISS.SI-ID 18924566

LEŠNIK, Luka, KEGL, Breda. Usage of optimization methods for determination of combustion model parameters. V: International Conference on Innovative Technologies, 10.-13.09.2013, Budapest, Hungary. CAR, Zlatan (ur.), KUDLÁČEK, Jan (ur.), PEPELNJAK, Tomaž (ur.). IN-TECH 2013 : proceedings. Rijeka: University of Rijeka, Faculty of Engineering, 2013, str. 33-36. http://www.uschovna.cz/zasilka/P87XIE6V858S5JXT-PG9. [COBISS.SI-ID 17179414

VAJDA, Blaž, LEŠNIK, Luka, ŽUNIČ, Zoran, KEGL, Breda. Analysis of spray structure characteristics. V: International Conference on Innovative Technologies, IN-TECH 2011, 01. 09. 2011 to 03. 09. 2011, Bratislava, Slovakia. KUDLÁČEK, Jan (ur.), PEPELNJAK, Tomaž (ur.). IN-TECH 2011 : proceedings. [S. l.: [J. Kudlaček], 2011, str. 561-565. [COBISS.SI-ID 15311894

LEŠNIK, Luka, VAJDA, Blaž, ŽUNIČ, Zoran, KEGL, Breda. Numerical and experimental research of spray characteristics. V: International Conference on Innovative Technologies, IN-TECH 2011, 01. 09. 2011 to 03. 09. 2011, Bratislava, Slovakia. KUDLÁČEK, Jan (ur.), PEPELNJAK, Tomaž (ur.). IN-TECH 2011 : proceedings. [S. l.: [J. Kudlaček], 2011, str. 340-343. [COBISS.SI-ID 15286294