Papers

asist. prof. dr. Timi Gomboc

Researcher

Email: timi.gomboc@um.si

Papers:

PDF Paper

Timi Gomboc, Jurij Iljaž, Luiz C. Wrobel, Matjaž Hriberšek, Jure Marn, "Design of constant temperature cooling device for melanoma screening by dynamic thermography", Engineering analysis with boundary elements, April 2021, vol. 125, str. 66-79, ISSN 0955-7997, DOI: 10.1016/j.enganabound.2021.01.009. [COBISS.SI-ID 50377219]

Jurij Iljaž, Luiz C. Wrobel, Timi Gomboc, Matjaž Hriberšek, Jure Marn, "Solving inverse bioheat problems of skin tumour identification by dynamic thermography", Inverse problems, Feb. 2020, vol. 36, no. 3 (035002), str. 1-29, ISSN 1361-6420, DOI: 10.1088/1361-6420/ab2923. [COBISS.SI-ID 22995222]          

Timi Gomboc, Jurij Iljaž, Jure Ravnik, Matjaž Hriberšek, "Spherical porous particle drying using BEM approach", Engineering analysis with boundary elements, Nov. 2019, vol. 108, str. 158-167, ISSN 0955-7997, DOI: 10.1016/j.enganabound.2019.07.019. [COBISS.SI-ID 22599958]

Timi Gomboc, Matej Zadravec, Jurij Iljaž, Gregor Sagadin, Matjaž Hriberšek, "Numerical model of three stage spray drying for zeolite 4A - water suspensions coupled with a CFD flow field", International journal of simulation modelling, June 2019, vol. 18, no. 2, str. 217-228, ISSN 1726-4529, DOI: 10.2507/IJSIMM18(2)462. [COBISS.SI-ID 22401558]

Yasir Beeran Potta Thara, Miha Jordan, Timi Gomboc, Blaž Kamenik, Boštjan Vihar, Vanja Kokol, Matej Zadravec, "Solidification of gelatine hydrogels by using a cryoplatform and its validation through CFD approaches", Gels, June 2022, vol. 8, iss. 6, 17 str., ilustr., ISSN 2310-2861, DOI: 10.3390/gels8060368. [COBISS.SI-ID 112219395]

Jure Ravnik, Gorazd Bombek, Aleš Hribernik, Timi Gomboc, Matej Zadravec, Aleks Kapun, Grega Hrovat, Jure Gradišek, Matjaž Hriberšek, "Energy intake models for intermittent operation of dead-end microfiltration filling line", Energies, Nov. 2022, iss. 23, 8854, str. 1-18, ilustr., ISSN 1996-1073, DOI: 10.3390/en15238854. [COBISS.SI-ID 132258563]
Timi Gomboc, Jurij Iljaž, Matej Zadravec, Matjaž Hriberšek, "Sklopljen model prenosa toplote in snovi med delcem in tokom tekočine pri razpršilen sušenju na osnovi Metode robnih elementov = The model of conjugate heat and mass transfer between a particle and a fluid flow in spray drying based on the boundary element method", Anali PAZU, [Tiskana izd.], april 2022, letn. 12, št. 1, str. 31-66, ISSN 2232-416X. [COBISS.SI-ID 106546947]

 

Timi Gomboc, Jurij Iljaž, Jure Ravnik, Matjaž Hriberšek, "A point particle source model for conjugate heat and mass transfer in
dispersed two-phase flows by BEM based methods", Engineering analysis with boundary elements, Jan. 2023, DOI: https://doi.org/10.1016/j.enganabound.2023.01.042.